|
Malco TSHD Turboshear Heavy Duty | 
 enlarge
| Brand: Malco
Category: Home Improvement
List Price: $69.99
Buy New: $68.30
You Save: $1.69 (2%)
New (6) from $68.30
Rating:  6 reviews
Sales Rank: 2492
Media: Tools & Hardware
Shipping Weight (lbs): 2.9
Dimensions (in): 16 x 8 x 2.3
MPN: TSHD
Model: TSHD
UPC: 686046530567
EAN: 0686046530567
ASIN: B0002894R0
Shipping: Eligible for Super Saver Shipping
Availability: Usually ships in 24 hours
| |
| Features:
| • | Turns you electric or cordless drill into a power shear quickly and easily | | • | Cuts up to 18-gauge galvanized and 20-gauge spiral duct | | • | One handed operation, cuts layered metal seams including spiral duct metal seam to 20 gauge. | | • | Cuts straight and to the left, capable of navigating tight curved patterns and square cuts. | | • | Replaceable blades |
|
| Accessories:
|
| Similar Items:
|
| Editorial Reviews:
Product Description
Turbo Shear Attachement, Turns Your Drill Into A Metal Cutting Shear, Heavy Duty Jaws & Gearing Are Suitable For Cutting 18 Gauge Galvanized Steel & Most Other Common Sheet Metals, 20 Gauge Capacity In Sprial Duct & Layered Metal Seams, Fits Most 14.4V Or Larger A/C Or Cordless Drills, Cuts Straight & To Left, Capable Of Navigating Tight Curved Patterns & Square Cuts, Blind Cuts Require A 1" Starting Hole.
|
| Customer Reviews: Read 1 more reviews...
Great item September 3, 2007
W. foos
2 out of 2 found this review helpful
I was cutting metal barn siding/roofing with this tool and what a blister saver! cuts like butter. I would highly recommend it. Used it on a cordless craftsman and also a dewalt corded drill
Great Product June 25, 2007
Kiwi Fridgie (New Zealand)
1 out of 1 found this review helpful
This is an awesome tool for me. I'm an HVAC tech that has to cut metal once in a while but not very often. I loathe using hand shears and that makes this a great tool for me. It takes up little room in the van, connects to the drill easily (I've tried it on 2 types, both work great), and it does its job very well.
Malco Turbo Shear HD Review January 10, 2007
Crowman (Morganton, GA)
3 out of 3 found this review helpful
I recently re-roofed my house in red metal. The roof had several complex valleys where the metal needed to be cut at various angles. The steel roofing panels were easily cut with the Malco TSHD attachment. I alternated using it between a Ryobi 18 volt battery powered electric drill and a Black & Decker 14.4 volt battery powered Fire Storm drill. Both worked equally well. The Turbo Shear attachment went through the 29 gauge steel like a knife through butter. The 3/4 inch high ribs were not a problem for the Turbo Shear attachment to cut through.
One thing I noticed was that the bottom shear jaw would scratch the metal on it's side; however, by placing the cutter on the waste side, this was eliminated. The spindle has three flats which makes it easy to tighten the battery powered drill's keyless chuck around. If you are installing metal roofing, this is a low-cost alternative to both a nibbler and power shear, plus with the freedom of going cordless.
Buy it.
pleasantly surprised January 9, 2007
Stickboy (Truckee CA)
2 out of 2 found this review helpful
I bought the turboshear hoping it would work as described. I wanted to remove some ribbed metal roofing from the valleys on my house and replace it with flat metal. As I got into the project, It required a combination of turboshear, tin snips and attitude, due to multiple layers. The turboshear could not cut multiple layers but was able to get into pretty tight spots. It definitely made this project go a lot faster. Occasionally if I used too much force trying to get into a tight area, the brackets would slip on the drill handle. This didn't happen a lot. I definitely pushed the limits of the turboshear and was pleasantly surprised at how well it performed.
Malco shears do well.... September 2, 2005
Wes Carraher (New Mexico)
2 out of 2 found this review helpful
These scissor type power shears work very well. Mostly I work with copper sheet metal so I prefer them to the double cut models which have a strip of waste product with each cut. Previously I have always used hand snips for all long cuts, these shears save my arm from cramps. Not a perfect edge on the cut, but good enough for roofing products which I mostly do. Very beefy, not too heavy, looks like they will last forever...
|
|
|
Bluecygnet.com Store
International Sites: United States |
United Kingdom |
Canada |
Germany |
France
This is an Amazon associate - the products referenced on this site are manufactured and sold by parties other than Bluecygnet Store. Bluecygnet Store makes no representations regarding either the products or any information vendors offer about their products. Any questions, complaints, or claims regarding the products must be directed to the appropriate manufacturer, vendor or to Amazon.com. | |
